Cover all vs Fit Inside

Cover All 

Under the   section to the left of your project, you'll find the Design Fit section which allows you to either leave a border around your design or stretch your image to cover the entire product. This option is not available for single photo designs. 

To ensure full coverage in this mode, part of the photos will be placed in what we call the cut line, the red area around the design. Anything in this red area may or may not be cut from the design. Anything within the safety zone is safe.

When working in this mode, make sure any part of the image you want printed on the design is within the blue line. 


  • For calendar and book designs, this tool is called Edge to Edge and found in the Layout section of the project toolbar above an individual book/calendar page. We have calendar and book design guides to help. 
  • On calendars, this is referred to as the Edge Options, which you can learn more about here.
  • Cover All is not available for designs with preset templates
  • If designing in free form mode, images must be stretched to cover the full cut area to ensure a full bleed print. 

Fit Inside

If you don't want any part of your images cut off, Fit Inside is your best bet.

The borders will print relative to the sizing shown in your project. If you don't want a white border, select a color option from the Background section to the left of the project.